[NEW Environmental Exhibition 2018] Full of cars that are attracting attention from trailers to garbage collection trucks, road surface cleaning vehicles and giant robots

The NEW Environmental Exhibition is an exhibition where technologies and products for environmental conservation, focusing on recycling technology.In conjunction with the Global Warming Prevention Exhibition, various recycling and energy -saving companies will be in the venue.The Tokyo Big Sight at the venue was brought to large plants such as super -large shredder machines, giving off a considerable presence.

大きな3台のトレーラーを展示していたのは上陣という愛媛県の企業。ドイツのLangendorf社製のトレーラーは新車ということもあるが、日本製のトレーラーとは見た目の雰囲気がかなり違う。カッチリとしていて剛性が高そうな印象だ。同社は製品の特性上、大量生産しているものではないので、日本の需要に合わせた日本仕様をオーダーして輸入販売している。

Even if it is made in Germany, not all of the components are made in Germany.Vessel's material is Swedish steel, which is also reduced in weight using a high -tension steel sheet, which has excellent abrasion resistance, Hardox450, a Swedish steel.Hub bearings and brakes are made by Saf-Holland in the Netherlands.It is known that excellent things are actively used regardless of the country of origin.

According to Hirofumi Yoshino of the Kaminjin maintenance club, there are disks and drums for brakes, but in Japan, there have been overwhelmingly many drum brakes.However, since the UD trucks have adopted a disk brake, the UD trucks have adopted disk brakes, it seems that it has tended to adopt a disk brake that has high fade -resistant and lighter weight in Japan.The dump trailer, LK25, which exhibited this time, uses a disc brake made by SAF.

The LK25 is a short full -length trailer, so it can be brought in even on a route that can only enter a 10T dump, making it possible to load 25T.

Heavy machine trailers are also lighter using high -ten steel, achieving 25 tons of loading weights on two axes.The unique thing is that the rear steer, which reduces the inner ring difference while enhancing the small turn, is set up in a connected part with the tractor, and the sensor that reads the angle is incorporated there to automatically perform the two rear axis.That's what you are.I saw these devices for the first time.

極東開発は、NEW環境展初日のこの日に新しいゴミ収集車を発表した。新型プレスパックは、従来のプレスパックの特徴であったプリウス風のテールランプや丸みを帯びたリアデザインなどを受け継ぎながら、さらに安全で快適に使いやすく改善されている。よりワイドになった投入口やスムーズな開閉を可能にしたワンタッチハンドル、投入口横のローディングスイッチは側方からも操作できるよう斜めに取り付けられている。ゴミの臭いの飛散を防止する内部のゴムも先端部に厚みをもたせることで丸まりを防止した。

The fire engine Morita also exhibited a garbage collection truck manufactured by affiliated companies, Morita Econos, and a press master.It was released in April, enhancing the visibility from the rear with a unique high -mountor panel, and increasing the design and rigidity by ribs on the body.This was a stunning projection mapping that matched the rib shape of the body at the event.According to Masayuki Ishibashi, the company's public relations, we asked a specialized company, but it took a lot of time to coordinate even after bringing it into the venue.

Shinmeiwa Kogyo also exhibited G-PX, a garbage collection truck that was fully remodeled in April.Attention is the SMART EYE MOTION that gets involved.This is a recognition of the image of the back eye camera, and when the worker's helmet is about to enter the back, it automatically stops.It is a mechanism to ensure safety between people and machines.

路面清掃車を手がける豊和工業は2台のロードスイーパーを展示していた。1台はタウンスイーパーと呼ぶEVのロードスイーパー。これは工場内で従来使われてきたものを公道走行可能としたもので、展示されていたのは試作品。来春の発売に向けて、今後デザインなどは改良される予定だ。リチウムイオンバッテリーで4時間の走行を可能にしており、深夜や早朝でも騒音の少ない路面清掃が実現できる。

The other is a medium truck -based four -wheeled brush road surface cleaning car, a prototype car that realizes one engine.In the past, four -wheeled brush -type road surface cleaning cars have a stable hydraulic pressure by installing a work engine so that the rotation of the vehicle is not affected by the speed of the vehicle and the speed of the running engine.However, the work engine has a burden on space and weight, and although exhaust gas regulations are not applied at this time, there is a possibility that exhaust gas regulations will be lined up in the future.Therefore, we prototyped from the driving engine so that the brush -driven hydraulic pressure could be created with PTO (Power Take Off).Specifically, the hydraulic pump driven by PTO is electronically controlled to adjust the discharge.In the future, such vehicles are likely to be required.

東ホール内にテントで囲まれたブースがあった。何を展示しているのかと思ったら、巨大なロボットだ。このロボットは次世代型解体装甲機でSUPER GUZZILLA（スーパーガジラ）という名らしく、ゴツくも何だか愛らしい不思議な雰囲気を放っている。そして音楽が流れ始めると両腕を色々なポーズに動かし、リズミカルに踊るのである。

The company was on display, a company called Taguchi Kogyo, and the company is a manufacturer in Okayama Prefecture that manufactures braika and steel cutting machines used in building demolition work.According to the explanation, the Super Gajira was produced in 2015, not actually used for demolition work, but was developed for company PR.

The body and arms are produced in -house based on the wheel loader of Hitachi Construction Machinery.The arm is driven by the servo motor with a 6 -axis multi -joint.The large -billed DS on the right arm and the DS cutter on the left arm are made of aluminum alloy, so it seems to be lightweight but not strength.

And the cockpit is equipped with an experience -type VR game, and you can enjoy the game that controls the supergajila and dismantling the building.The company has branded the gazilla, develops magazines and accessories, and strives to improve the image of the architectural demolition industry.